Rishabh Products

RE62 – DIN Mount Controller
New Products

RE62 – DIN Mount Controller

The RE62 controller is destined to control the temperature and other physical quantities (like pressure, humidity, level, etc.) in plastics, food, dehydration industries and similar other industries wherever there is a need to stabilize the changes of the measured value. 

ND30PNET

ND30PNET

Measurement and recording of 54 parameters, harmonics up to 51st, graphical screen-fully configurable by a user and Profinet interface - these are just some advantages of our new power network meter ND30PNET type.

Rish PQA
New Products

Rish PQA

RiSH PQA is a compact state of art Power Quality Analyzer designed for utilities, as well as for industrial & commercial customers. It can continuously monitor power quality in accordance with EN50160, also the built in flexibility allows the user to set customized setting.

Touch Screen - Rish EM 3490DSi
New Products

Touch Screen - Rish EM 3490DSi

RISH EM 3490 DSi Is specifically designed for Dual Source Energy Metering   which measures important electrical parameters of Utility (in normal mode) & Generators (in Power back up mode) both in Three phase and Single phase Network

Touch Screen - Rish DMCi
New Products

Touch Screen - Rish DMCi

RISH DMCi is a smart Demand Monitor and Controller which is specifically designed for industries to keep a check on their maximum demand by controlling Active, Reactive, Apparent or Current demand within the allowed Limits which helps to save Money on Utility bills for Industries

Touch Screen - Rish Master 3440i
New Products

Touch Screen - Rish Master 3440i

Touch Screen - RISH Master 3440i is powerful compact monitoring devices for accurate and reliable measurement of important electrical parameters in 3 phase and single phase Network & replaces the multiple analog panel meters. 

Touch Screen - Rish Master 3430i
New Products

Touch Screen - Rish Master 3430i

Touch Screen - RISH Master 3430i is powerful compact monitoring devices for accurate and reliable measurement of important electrical parameters in 3 phase and single phase Network & replaces the multiple analog panel meters. 

Rishabh Young / Rishabh iYoung
New Products

Rishabh Young / Rishabh iYoung

The new Rishabh Young and Rishabh iYoung Multimeter are compact, Handy & Trendy multimeters specially targeted for applications of Electrical contractors, Service Industry, Technicians, HVAC and also the education sector i.e., students who will be the future of tomorrow

Digital Earth Leakage Relay (96 x 96 mm)
New Products

Digital Earth Leakage Relay (96 x 96 mm)

The purpose of Earth Leakage protection is to measure the Earth leakage current of an electrical installation, or part of an installation, and interrupt the power supply if the Earth-Leakage current becomes dangerous to property.

Rish Flex - e 6024A
New Products

Rish Flex - e 6024A

1Phase,Universal Input Range 90-264 VAC, 124-370 VDC, High efficiency ≥87% & extremely compact (w-h-d) 54X90X62mm & DIN Rail Mountable

Rish Flex - e 4524A
New Products

Rish Flex - e 4524A

1Phase,Universal Input Range 90-264 VAC, 124-370 VDC, High efficiency ≥87% & extremely compact (w-h-d) 54X90X62mm & DIN Rail Mountable

Rish Flex - e 3024A
New Products

Rish Flex - e 3024A

1Phase,Universal Input Range 90-264 VAC, 124-370 VDC, High efficiency ≥87% & extremely compact (w-h-d) 54X90X62mm & DIN Rail Mountable

Rish Flex - e 1515A
New Products

Rish Flex - e 1515A

1Phase,Universal Input Range 90-264 VAC, 124-370 VDC, High efficiency ≥87% & extremely compact (w-h-d) 18X90X62mm & DIN Rail Mountable

Multi Transducer - Rish CON M

Multi Transducer - Rish CON M

The RISH CON - M transducer is used to measure and convert parameter of Three-phase 3W/4W AC Bal./Unbal. It ensures that the measurement and conversion of measured values into standard analog current signals. Relay / Pulse outputs.

Rish Insu 5Dx
New Products

Rish Insu 5Dx

Rish Insu 5Dx is a 5KV Digital Insulation Tester with selectable test voltage upto 5KV and Insulation Resistance measurement upto 10 T?. Ideal for testing insulation of HV/MV Transformers, Cables, Motors, etc. facility to measure PI, DAR, Ramp test.

Rish CON TPT (96 X 96)
New Products

Rish CON TPT (96 X 96)

Programmable input tap resistance(2/3/4 wire measurement) upto 25kOHM is converted to proportional 1 or 2 analog o/p signal either Idc or Vdc, Universal AC/DC aux With LED Display.

RE57, RE77 & RE96
New Products

RE57, RE77 & RE96

RE57, RE77 & RE96 are specially designed for universal input measurement from RTD , Thermocouple , Linear input . The controller is equipped with Innovative smart PID & Dual display for PV & SP.

RISHABH 6016

RISHABH 6016

The 6016 new multimeter is made for professional use that offers large range count,reliability, ruggedness, a complete tool for test automation, 100KHz Bandwidth and is equipped with 30 different measuring functions alongwith data logging facility & plug and play USB for connection with PC

RISHABH 6015

RISHABH 6015

The 6015 new multimeter is made for professional use that offers safety, large range count,reliability, ruggedness, a complete tool for test automation and is equipped with more than 30 different measuring functions alongwith data logging facility & plug and play USB for connection with PC

RISH SUMMATION CT

RISH SUMMATION CT

RISH XMER Sigma Summation CTs are designed to summarize several synchronous Alternating Currents of equal phase relation. They are used to add secondary currents of several main CTs in order to measure with one CT only. That means the primary currents are added & divided by the number of inputs

RISHABH 6013

RISHABH 6013

The 6013 new multimeter is made for professional use that offers safety, high resolution, large range count, reliability, ruggedness, a complete tool for test automation and is equipped with many different measuring functions along-with option of plug and play USB for connection with PC

 RISHABH 6012

RISHABH 6012

The 6012 new multimeter is made for professional use that offers safety, high resolution, large range count,reliability, ruggedness, a complete tool for test automation and is equipped with more than 30 different measuring functions along-with option of plug and play USB for connection with PC

RISHABH 616

RISHABH 616

RISHABH 616 is a rugged, TRMS, Functionally enhanced dual display, 6600 count, portable multimeter, a perfect tool for wide range of applications. The other key features include MIN/MAX, Data Hold and Peak Hold

RISHABH 615

RISHABH 615

Rishabh 615  is a rugged, dual display, 6600 count , poratable multimeter with wide selection of measurements. The other key features include MIN/MAX, Data Hold and Peak Hold

RISHABH 613

RISHABH 613

RISHABH 613 is a rugged, dual display , 6600 count, portable multimeter  with current measuring capability of up to 16A. It  is  designed specifically for Transformers testing applications. The other key features include MIN/MAX, Data Hold and Peak Hold

RISHABH 612

RISHABH 612

RISHABH 612 is a rugged, dual display, 6600 count, portable, universal application mutimeter with higher current measuring range of up to 660A( with Clamp). The other key features include Data Hold and Peak Hold

RISHABH 410

RISHABH 410

RISHABH 410 digital multimeter is suited for universal, general applications in the electrical and electronics fields for training and education. The other key features include 3999 count, dual display,  Data Hold and Peak Hold

DC Energy Meter - Rish EM DC
New Products

DC Energy Meter - Rish EM DC

RISH EM DC series is specially designed to measure, display and communicate DC Voltage, Current, Power and Energy to monitor and control the target system

RISH Clamp Power 1000A/400A AC/DC
New Products

RISH Clamp Power 1000A/400A AC/DC

RISH Clamp POWER 1000A/400A measures, calculate and displays important electrical parameters of single phase or three phase power system. It also features Resistance, continuity, diode and non contact voltage detection.

Digital Line Monitoring Relay
New Products

Digital Line Monitoring Relay

RISH Relay V/Hz is used to protect against Over Voltage, Under Voltage, Phase Unbalance, Phase Sequence detection, Phase Failure detection, Under and Over Frequency conditions.

Digital Current Monitoring Relay
New Products

Digital Current Monitoring Relay

RISH Relay I is used to protect against Over Current, Under Current, Current Loss, Current Un balance.

RISH DPM Hz
New Products

RISH DPM Hz

RISH DPM Hz is specially designed to measure important electrical parameters like Frequency and RPM.

RISH CAM Switches
New Products

RISH CAM Switches

The Wide range of Rish Rotary CAM switches cover most application with different contact design, contact material and terminals allow their use as control switches, instrumentation switches , motor control switches and Electronic circuitory.

DIN rail Moving Iron meter (EQ,PQ,ZQ 35)

DIN rail Moving Iron meter (EQ,PQ,ZQ 35)

EQ35, PQ35 & ZQ35 meters measure AC/DC Voltage or Current and frequency. These meters are installed on 35mm Din rail, the mounting width is 45mm and it is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

Anush Series meters.

Anush Series meters.

AN 011 & 012 meters measure AC/DC Voltage or Current and frequency. The design features detachable lower fascia which allows the flexibility of either surface or window mounting. These meters have a rear zero adjuster screw for tamperproof installation.

Rish Vista.
New Products

Rish Vista.

The RISH VISTA range of analog panel meters offers accurate measurement and indication of most electrical and electronic parameters in industry as per industrial standard case size.

Synchroscope  (SQ)

Synchroscope (SQ)

SQ96 Synchroscope indicates the phase & frequency difference between two AC alternators which are to be paralleled with the help of rotating LEDs. The meter is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

Vibrating Reed frequency meter  (FQ)

Vibrating Reed frequency meter (FQ)

FQ72 & FQ96 frequency meters measure frequency in the range of 45 to 65Hz with the help of thin steel strips called reeds placed in a row on a steel plate. The meter is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

Moving iron selector switch meter

Moving iron selector switch meter

SWT 72 & SWT 96 moving iron selector switch meters measure rms values of AC Voltage or AC Current of 1 phase as well as 3 phase 3 wire & 4 wire systems. It is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

Dual Frequency meters (FM 2 in 1)

Dual Frequency meters (FM 2 in 1)

ZQ96 2in1 meters measure two different ranges of frequencies in the range of 45 to 450Hz. For maximum accuracy, the essential measuring range is obtained by suppressing unwanted frequency span. The meter is housed in UL94V-0 approved polycarbonate case and can be mounted in Mosaic mounting.

Dual Moving Coil DC meters (DS 2 in 1)

Dual Moving Coil DC meters (DS 2 in 1)

DS 96 2 in 1 meters measure average values of DC Voltage or DC Current. Any two different parameters can be measured in one case with this meter. It is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

Dual Moving Iron AC meters (DE 2 in 1)

Dual Moving Iron AC meters (DE 2 in 1)

DE 96 2 in 1 meters measure rms values of AC Voltage or AC Current. Any two different parameters can be measured in one case with this meter. It is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).  

Maximum Demand Ammeters (BM & EB)

Maximum Demand Ammeters (BM & EB)

BM 48/72/96 meters measure maximum demand current and EB 72/96 meters measure instantaneous & maximum demand current. These meters are having unique feature of Scale Interchangeability, housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

Power meter 240deg (LML)

Power meter 240deg (LML)

LML96 & LML144 Power meters measure active & reactive power with a better resolution. It is suitable to indicate forward (export / outgoing) and reverse (import/incoming) power flow. The meter is housed in UL94V-0 approved polycarbonate case and can be mounted in Mosaic mounting.

Frequency meter 240deg (FML)

Frequency meter 240deg (FML)

FML96 & FML144 Frequency meters measure frequency in the range of 45 to 450Hz. For maximum accuracy, the essential measuring range is obtained by suppressing unwanted frequency span. The meter is housed in UL 94 V-0 approved polycarbonate case.  

Moving Coil meter DC ammeters and voltmeters 240deg (DSL)

Moving Coil meter DC ammeters and voltmeters 240deg (DSL)

DSL48, DSL72, DSL96 and DSL144 Moving Coil meters measure average DC Voltage or DC Current with a better resolution. These meters are having unique feature of Scale Interchangeability, housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

Frequency meter 90deg (FM)

Frequency meter 90deg (FM)

FM48, FM72, FM96 & FM144 Frequency meters measure frequency in the range of 45 to 450Hz. For maximum accuracy, the essential measuring range is obtained by suppressing unwanted frequency span. It is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting.

Moving Coil meter AC ammeters and voltmeters with rectifier 90deg (DG)

Moving Coil meter AC ammeters and voltmeters with rectifier 90deg (DG)

DG48, DG72, DG96 and DG144 Moving Coil with rectifier meters are calibrated to measure AC Voltage or AC Current. These meters are having unique feature of Scale Interchangeability, housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).  

Moving Coil meter DC ammeters and voltmeters 90deg(DS)

Moving Coil meter DC ammeters and voltmeters 90deg(DS)

DS48, DS72, DS96 and DS144 Moving Coil meters measure average DC Voltage or DC Current. These meters are having unique feature of Scale Interchangeability, housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).  

Moving Coil meter AC ammeters and voltmeters with rectifier 240deg (DGL)

Moving Coil meter AC ammeters and voltmeters with rectifier 240deg (DGL)

DGL48, DGL72, DGL96 and DGL144 Moving Coil with rectifier meters are calibrated to measure AC Voltage or AC Current with a better resolution. These meters are having unique feature of Scale Interchangeability, housed in UL94V-0 approved polycarbonate case.

P20H

P20H

Destined for continuous conversion of high I/ V signals to standard D.C I/ V output signal. Small dimensions. 0.2 accuracy class. Fully prog. parameters: measurement avg. time, Conversion characteristic, preservation of the output signal at over. flows, RS-485 transmission parameters.

P17G

P17G

A current loop separators. These are very thin (6.2mm) hence acquire less space and fit easily in the cabinet. P17 intakes input from temperature sensor/ DC voltage/ resistance and P17G input is DC current. Galvanic isolation between input and output in P17G.  

Power Factor meter 240deg (LFL)

Power Factor meter 240deg (LFL)

LFL96 & LFL144 Power factor meters measure PF (cosine of the angle Ø between Voltage & Current vectors) with a better resolution. It is calibrated in values of cosØ in values of Ø. Housed in UL94V-0 approved polycarbonate case it can be mounted in Mosaic.

Programming Cable PRKAB 600

Programming Cable PRKAB 600

The programming cable PRKAB 600 serves to connect Rishducer V604, TP-25K transducers to a PC on which PC software is installed for purposes of programming the transducer. Cable provides electrical insulation between the PC and the transducer. Transmitter prog. connector FCC-68 and ancillary cable.

Moving Iron meter AC ammeters and voltmeters 90deg(DE)

Moving Iron meter AC ammeters and voltmeters 90deg(DE)

DE48, DE72, DE96 and DE144 Moving Iron meters measure true rms AC Voltage or AC Current. These meters are having unique feature of Scale Interchangeability, housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

RS485 to RS232 Converter

RS485 to RS232 Converter

RS485 to RS232 Converter converts RS485 signal to the RS232 signal, used for communication between the measuring instruments with RS485 o/p & PLC / SCADA / Energy Management System with RS232 input.  

Power meter 90deg (LM)

Power meter 90deg (LM)

LM96 & LM144 Power meters measure active & reactive power. The meter is suitable to indicate forward (export/outgoing) and reverse (import/incoming) power flow. The meter is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).

RS485 to USB converter

RS485 to USB converter

RS485 to USB Converter converts RS485 signal to the USB signal, used for communication between the measuring instruments with RS485 o/p & the computer system with USB input.

Power Factor meter 90deg (LF)

Power Factor meter 90deg (LF)

LF72,LF96 &LF144 Power factor meters measure Power factor. The meter is calibrated in values of cosØ in values of Ø. It is housed in UL94V-0 approved polycarbonate case and can be mounted in Mosaic mounting.

P17

P17

A current loop separators. These are very thin (6.2mm) hence acquire less space and fit easily in the cabinet. P17 intakes input from temperature sensor/ DC voltage/ resistance and P17G input is DC current. Galvanic isolation between input and output in P17G.

Rish Clamp 300/1000A AC

Rish Clamp 300/1000A AC

3¾ digit 1000A/300A Clamp meter measures Aac Vac Vdc F ? continuity Hz Dutycycle °C, at awkward positions of bus-bars, conductors difficult to access.180°rotating clamp jaws with 55/50mm Jaw opening Backlite display Auto/Manual mode,Double moulded soft touch cover & firm grip

Rish Insu 5000 A/AK/M/R

Rish Insu 5000 A/AK/M/R

HV insulation tester used for measurement from 10Kohm-1Teraohm with selectable test voltage upto 5KV. Voltage measurement upto 2.5KV AC/DC. Confirms to IS 2992(EN 61557) IP52, EMC. Available in Mains, rechargeable battery and crank operated. Guard terminal for elimination of surface current

Rish Clip-ON CT's

Rish Clip-ON CT's

RishClamp-ON CT (frequency 40Hz…1KHz)measures current without interrupting the conducting line used directly with Rish multimeters. Compliance-CAT III 600V per IEC 61010. Accuracy 1 .Used for electrically isolated measure of AC. Models:1000A/5A, 1000A/1A, & 300A/0.3A  

Rishmulti 20

Rishmulti 20

5 ¾ 309999 counts High Precision Multimeter ( V A Ohm Hz F °C Diode) Direct Amp. measurement upto 10A, Triple display of V, Hz or V and Min/Max. RMS with distorted wave, Continuity, Dutycycle, DataHold, Auto/Manual range, °C(PT100/1000), overload warning, Auto off. Cat III/IV

Rishmulti SI 232

Rishmulti SI 232

Used for data (Logging, Processing, Analysis & Recording) storing off/online & transmission of data to PC in Online mode via RS232 Interface. Simultaneous viewing of 6 Rishmulti SI232 adapters in datalogger mode. Sampling rate 50ms-1Minute.128KB memory can store data upto 200,000 readings

Rish Shunts

Rish Shunts

Rish Shunts provide DC millivolt signal proportional to higher DC current to drive ammeter indicators, overload protection and control devices. These are made from Manganin material. Available from 1A to 3000A with an accuracy 0.5 & 1%. Standard voltage drop is 50, 60, 75 &150mV.

RE19

RE19

Universally programmable smart PID logic temperature controlling with auto-tuning & soft-start function. Bump less transfer between auto & manual mode. CE Approved. Size: - 96 x 96 mm. Has LCD display for set point program viewing. 4 Binary/ Relay outputs or 2 analog outputs

Rishmulti 18 S

Rishmulti 18 S

4 ¾ digit 31000 counts which measures Vac Vdc Vac+Vdc Aac+Adc Ohm Continuity Diode Automatic DataHold Negative Value indication, Auto/ Manual range, continuity test, Temperature measurement(PT100/PT1000), overload warning, Auto Power off. Cat II / III

Rish Insu-20 Battery Operated (optional mains operated)

Rish Insu-20 Battery Operated (optional mains operated)

Analog digital Insulation & continuity tester for measure of 10Kohm-2Gohm with selectable test voltage upto 1000V. LR measurement from 0.01-99.9 ohm & upto 600V AC/DC. Storage of Min, Max & last 50 readings. Preselectable measurement time, stop watch, fuse blow, auto power off

Rishmulti 16 S

Rishmulti 16 S

3 ¾ Digit 3100 counts which measures Vac Vdc Vac+Vdc  Aac+Adc  Adc, Ohm Diode Farad,Hz, Duty cycle, Automatic Data Hold, Negative Value indication, Auto/ Manual range, continuity test, °C(PT100/PT1000), overload warning, Auto Power off. Cat IV.

Rishmulti 15 S

Rishmulti 15 S

3 ¾ Digit 3100 counts which measures Vac Vdc Aac Adc Ohm Diode DataHold Farad Hz Duty cycle, Neg Value ind, Auto/ Manual range, continuity test, Temp. measurement (PT100/PT1000), overload warning, Auto Power off, interface & software Rishcom 100. Cat IV

Rish Energy Management System (EMS)

Rish Energy Management System (EMS)

An ideal energy management solution for industries, manufactring plants, commercial buildings, malls, or other application where high amount of energy is consumed by giving usercontrol&management features. Generation of analitical graphs & reports. Compatible with our Multifunction Meters.

Rishmulti 14 S

Rishmulti 14 S

3 ¾ Digit 3100 counts which measures Vac Vdc Aac, Large range Adc, Ohm Continuity Diode Data Hold, Polarity indication, Auto/ Manual range, continuity test, °C(PT100/1000), interface with clamp ON CT, overload warning, Auto off, interface & software Rishcom 100. Cat IV

RISH Clamp 1000A/300A AC/DC

RISH Clamp 1000A/300A AC/DC

3¾ digit 1000A AC/DC Clamp meter measures Aac/dc Vac/dc Vdc F Ohm & continuity Hz Dutycycle °C, at awkward positions of bus-bars, conductors difficult to access.180°rotating clamp jaws with 55/50mm Jaw opening Backlite display Auto/Manual mode.

Rishmulti 13 S

Rishmulti 13 S

3 ¾ Digit 3100 counts which measures Vac Vdc Aac, Medium range Adc Ohm Continuity Diode Data Hold, Polarity indication, Auto/ Manual range, continuity test, °C ( PT100/1000), interface with clamp ON CT, overload warning, Auto off, interface & software Rishcom 100, Cat IV

Rish Insu-10 Battery Operated

Rish Insu-10 Battery Operated

Analog Digital Insulation & continuity tester for measure of 10Kohm-999Mohm with selectable test voltage upto 1000V. LR measurement from 0.01-99.9 ohm & upto 600V AC/DC. Storage of Min, Max & last 50 readings. Preselectable measurement time, stop watch, fuse blow, auto power off

RishMit 30

RishMit 30

Insulation resistance with analog/digital multimeter measuring Vac Vdc Vac+Vdc Hz mADC mAAC+DC Ohm continuity, Diode Farad Temperature AC I measurement with clip-on sensor with measureemnt of 3GOhm with test V upto 1000V, Functions of Min, Max, Auto off  

Rishmulti 12 S

Rishmulti 12 S

3 ¾  3100 counts Analog Digital Multimeter which measures Vac Vdc Ohm Continuity Diode Automatic Data Hold Negative Value indication, Auto/ Manual range, continuity test, Temperature measurement (PT100/PT1000), overload warning, Auto off Cat II/III

RE82

RE82

RE82 has two set points configurable. Universally programmable input, two outputs and one output (optional). 2 x 4 Digit LED Display & 2 x 21 points colour Bar graphs. Automatic valve steering logic. Programmable in 4 PID sets with 15 step programs. Size: 48 x 96 mm

RE72

RE72

In addition to the basic features, RE722 has 8 alarm functions. It has timer function, alarm latch function in bi-stable state. Size: 48 x 48 mm. Soft-start function. Universal programmable input. Other than two outputs, it has additional output. Programmable with LPConfig Software.

Rish Max 10

Rish Max 10

3 ¾  3999 counts Digital Multimeter which measures Vac Vdc Adc Aac Ohm Farad Hz Temperature Continuity Diode Hold / ON Relative measurement Dutycycle measurement Auto/Manual range Buzzer/continuity test, Temperature measurement (K type) overload warning Auto-off Theft protection

SM4

SM4

SM4 is module of logic outputs. Control of actuators from monitoring systems or PLC over RS485. 4 relay outputs or 8 OC outputs steered through RS-485/Modbus. Fixing on a TS35 rail. Full galvanic separation between outputs (for relay outputs). Configuration through free LPConfig software.

Rish MIT30

Rish MIT30

Analog Digital Multimeter with insulation resistance measurement which measures Vac Vdc Vac+Vdc Hz mADC mAAC+DC Ohm continuity, Diode Farad Temperature AC current measurement with clip-on sensor and insulation resistance measurement. Functions of Min, Max, Auto off, continuity tester

SM5

SM5

SM5 is a module of logic inputs. Transferring information of machine state to monitoring systems and PLC. 8 relay logic inputs read out through RS-485/Modbus. Fixing on a TS35 rail. Signaling of input states on LED diodes. Full galvanic isolation. Configuration through the free LPConfig software.

SM3

SM3

SM2 is module of standard signals and temperature into RS-485 / MODBUS in 4 channels. Linear individual characteristics. Fixing on a TS35 rail. Mathematical functions realized between channels and on channels. 2 programmable OC outputs. Full galvanic separation between inputs.

SM2

SM2

SM2 is module of standard signals and temperature into RS-485 / MODBUS in 4 channels. Linear individual characteristics. Fixing on a TS35 rail. Mathematical functions realized between channels and on channels. 2 programmable OC outputs. Full galvanic separation between inputs.

PD12

PD12

PD12 is a converter of USB/ 232 interface. Maximum transmission rate up to 921.6 kb/s (depending on RS-485 wire length). Modbus RTU/ ASCII communication protocols. Works on very low power (30mA @ 5V DC.) Small size and easy to install. CE approved

SM1

SM1

SM1 is module for analog inputs. It can do Conversion of standard signals and temperature into RS485/Modbus in 2 channels. Linear individual characteristics. Fixing on a TS35 rail. Mathematical functions realized between channels and on channels. Overall dimensions 22.5x120x100 mm.

RISH TW Series Round CTs

RISH TW Series Round CTs

Rish TW series round CTs are round in shape & encapsulated with UL94V-0 approved polycarbonate. These CTs have terminals for secondary connections & feature wide range of primary current ratings, Bus bar sizes, case widths. They are having wall, cable & bus bar mounting options

PD8

PD8

PD8 is a converter of RS485/ Ethernet interface. Enables access to devices with RS-485 interfaces for master devices and SCADA applications through the Ethernet network (independent of the communication protocol).Different working modes(TCP/IP, Real Port Network Service & UDP Serial Bridge)

PD10

PD10

PD10 is a converter of USB/ RS485 interfaces. Maximum transmission rate up to 1 Mb/s (depending on RS-485 wire length). Transparent for communication protocols. Galvanic separation protects computer USB ports. Compatible with Windows 2000, XP, Server 2003, Vista, Server 2008 (x86 and x64)

RISH TW-E Series Round CTs

RISH TW-E Series Round CTs

RishTW-E series round CTs are cost effective, round in shape & encapsulated with UL94V-0 approved polycarbonate. These CTs have wires with lugs for sec. connections & feature wide range of system current ratings, Busbar sizes,case widths.They have wall, cable & bus bar mounting options

RISH Protection class CTs

RISH Protection class CTs

Rish Protection class CTs are square & round type encapsulated with UL94V-0 approved polycarbonate.These CTs used for protection purpose (acc class 5P10, 10P10 etc)& features wide range of primary current ratings, Busbar sizes,case widths,having wall, cable, bus bar & DIN rail mountings

PD51

PD51

PD51 is a converter for RS232/RS485 interface. It enables to increase number of devices increase in the network. Ensures the automatic control of the data flow direction. It is galvanically isolated. Available in two formats viz. DIN Rail mount (as repeater) and portable type (converter).

RE81

RE81

RE81 is destined for simple applications. Conforms safety according to EN – 61000-6. Size: 48 x 96 mm. 2 configurable outputs & has smart PID control logic. Input with PT100 and Thermocouple J, K & S Type. Output available is SSR or Binary. Programmable with LPConfig Software

RISH X'mer Series Square type CTs

RISH X'mer Series Square type CTs

Rish X’mer CTs are square type and encapsulated with UL94V-0 approved polycarbonate. Metering CTs feature with wire sealable terminal covers & wide range of primary current ratings, Bus bar sizes, case widths.  Wall, cable, bus bar & DIN rail mounting options available.

RISH Xmer Split Core CT's

RISH Xmer Split Core CT's

Rish Split core CTs are square type and encapsulated with UL94V-0 approved polycarbonate having an openable jaw which enables an operation free installation/removal. Wide range of system current ratings, Busbar sizes, case widths & having wall, cable & bus bar mountings

RE71

RE71

RE71 conforms to safety according to EN – 61000-6. Size: 48 x 48 mm. One control output, relay output or voltage output for SSR relay control & has auto tuning and smart PID control logic. Accessible with PT100 and Thermocouple J, K & S Type. Output is SSR or Binary

RE 60

RE 60

The RE 60 controller is a simple on- off controller which works by switchning ON & Off the electrical device for controlling temperature. It is destined for the temperature control in telecommunication cabinets in food and drying industries and everywhere.

RE22

RE22

E22 conforms to safety according to EN – 61000-6. Size: 48 x 48 mm. configurable output & has smart PID control logic. Soft-start function. Universal programmable input. Output available is SSR or Binary. Programmable with LPConfig Software

RE55

RE55

RE55 is destined for simple applications. Conforms safety according to EN – 61000-6. Size: 96 x 96 mm. Control output (Relay or Transistor) & has auto tuning and PID algorithm and ON/OFF logic. Accessible with PT100 and Thermocouple J, K & S Type. Output available is SSR or Binary

Digital Panel Recorder N30B

Digital Panel Recorder N30B

N30B is 3 colour LED disp. digital meter. Records & reads data from devices with RS485 & MODBUS. 21 point individual characteristics. Internal Memory-350064 records. PC data archiving in MYSQL DB. RTC with day light saving time (DST) automatic adjustment. Size: 48 x 96 mm.

RE70

RE70

In addition to the basic features, RE720 has relay O/P, Password Protection, Self Tuning, Innovative smart PID algorithm, Programmable by push button.

Paperless Recorder KD8

Paperless Recorder KD8

LCD Touch Screen with user interface panel. Comes with 3/ 6 programmable input channels. Have 6/ 12 alarm outputs and 4/ 8 digital outputs. Visualization of measurements in graphical forms. Compatible with MS windows CE operating System. CE Approved and safety as per European Norms.

Paperless Recorder KD7

Paperless Recorder KD7

LCD Touch Screen with user interface panel. Comes with 3/ 6/ 9/ 12 programmable input channels. Have 6/ 32 alarm outputs, 8/ 16 digital outputs and 4 or 8 analog outputs. Visualization of measurements in graphical forms. Compatible with MS windows CE operating System. Diversified user rights.

Power Quality Monitor

Power Quality Monitor

RISH PQM is a compact, multi-function panel mount power quality monitor, which measures, calculates and displays major electrical parameters of three phase power system

PD22

PD22

PD22 is a data logger device which can archive emergency events. Archiving of process data and stores 390,000 Records. Archiving of emergency events (44400 events). Data exchange consisting in transmission of demands from the master system to the specific device

Isolating Amplifier Rish ducer TV808

Isolating Amplifier Rish ducer TV808

DC isolating amplifier to electrically insulate i/p & o/p signals at2.3KV &power supply at3.7KV or amplify the signal levels in 252 i/p [0..1000V, ±20mA, ±20V] o/p [±20mA, ±10V] combinations selected by soldered jumpers, RLoad Max600 OHM  Accuracy±0.2%

Configurable Transmitter Rish ducer PT602

Configurable Transmitter Rish ducer PT602

Converts input variable a signal from Pt 100 at Temp (170 - 800°C) to linear output signal. Version 2,3,4 wire connections 1,2 channel i/p o/p, Measuring ranges configurable with DIP switches. Universal AC/DC aux Accuracy±0.5%, Insulation 3.7KV, Sensor open/short circuit indicator

Programmable Universal Transmitter Rish ducer V604

Programmable Universal Transmitter Rish ducer V604

Onsite Programmable universal transmitter Converts input Idc or Vdc, Thermocouple, RTD or remote sensor to a proportional 2 analog o/p signal. Open circuit sensor supervision, trip point setting(-10to110%) Universal AC/DC Aux. Accuracy ±0.2% Automatic calibration for lead compensating

RISH CON SI-102 (Dual output DC isolator )
New Products

RISH CON SI-102 (Dual output DC isolator )

Rish CON SI-102 Two electrically isolated analog outputs prevent interference voltage and current. Solves grounding problem in meshed signal networks.The device has one input and provides two independent outputs in an extremely small space.

Programmable Tap position transducer Rish CON TPT
New Products

Programmable Tap position transducer Rish CON TPT

Programmable input tap resistance(2/3/4 wire measurement) upto 25kOHM is converted to proportional 1 or 2 analog o/p signal either Idc or Vdc, Universal AC/DC aux With LED Display.

Rish CON SI 101 - Powerful DC Signal Isolator

Rish CON SI 101 - Powerful DC Signal Isolator

Powerful DC Signal Isolator - Rish CON SI101 electrically isolates the input, output & power supply The isolator fulfills all the requirements concerning EMC and safety (IEC 61010).Onsite selectable DIN rail & wall mounting

P18

P18

P18-Temperature & Humidity Transducer & P18L-Temperature or Humidity transducer. Calculation of selected physical quantities (dew-point temperature, absolute humidity-only P18). 2 analog outputs 0/4…20 mA or 0…10 V - P18 option. Storage of maximum and minimum values (only P18).

Current/Voltage Transducer - E13 (3 Channel)

Current/Voltage Transducer - E13 (3 Channel)

Rishducer E13 convert a 3 sine waves AC voltage (upto 750V) or Current (upto 10A) of sine waveform into proportional 3 analog output load dependent Vdc or independent Idc based on arithmetical mean value measuring, calibration to RMS with sine waveform, AC or DC Aux supply

Current/Voltage Transducer - E15

Current/Voltage Transducer - E15

Rishducer E15 convert a sine wave AC voltage (upto 500V) or Current (upto 6A) of sine waveform into proportional 1 or 2 analog output load dependent Vdc or independent Idc based on arithmetical mean value measuring, calibration to RMS with Sine waveform, AC or DC Aux supply

Programable Multifuntion Transducer - M00 (LONbus communication)

Programable Multifuntion Transducer - M00 (LONbus communication)

M00 is programmable with LONWORKS interface, enable users to determine and supervises several parameter of electric power system programmed using LONTALK file transfer protocol. The measured variables transferred by means of standard network variable types (SNVT). Universal aux

Programable Multifunction Transducer - M01 (Modbus Communication)

Programable Multifunction Transducer - M01 (Modbus Communication)

M01 is a programmable with RS485 bus interface, enable users to determine and supervise several parameter of electric power system with Modbus (RS485), power system Simulation, acquisition of meter data, password protect, 4 integrated energy meters, mark setting. Universal aux

Programable Multifunction Transducer - M40/M30

Programable Multifunction Transducer - M40/M30

M40/30 simultaneously measure several variables of electric power system and converts them into 3 or 4 analog output, Modbus (RS485) communication, output &power system simulation, acquisition of meter data, password protect, 4 integrated energy meters, mark setting, universal Aux

Programable Multifunction Transducer - Mxx Series

Programable Multifunction Transducer - Mxx Series

Mxx series simultaneously measure several variables of electric power system converting them into 2,3 or 4 analog output, 2 or 4 digital output for signaling limits, power metering, limit output AND/OR, Output Simulation, acquisition of meter data, mark setting with universal supply

Power Transducer Rish Con P

Power Transducer Rish Con P

Rishcon-P converts active, reactive & apparent power of 1Ø /3Ø balanced or unbalanced loads into proportional 1or2 analog output load dependent Vdc or independent Idc. Universal Aux with accuracy ±0.2%,TRMS type Onsite input/output configurable,7 Seg LCD display, RS485

Current / Voltage Transducer Rish CON CA / CON CV (TRMS)

Current / Voltage Transducer Rish CON CA / CON CV (TRMS)

Rishcon-CA/CV measures and convert AC I or V input signal to proportional analog output load dependent Idc or independent Vdc. Wide Auxiliary power supply Aux with accuracy ±0.2% & TRMS measurement.Narrow housing, 22.5 mm.

Current / Voltage Transducer Rish CON CA / CON CV

Current / Voltage Transducer Rish CON CA / CON CV

Rishcon-CA/CV measures and convert AC I or V input signal to proportional analog output load dependent Idc or independent Vdc. Wide Auxiliary power supply Aux with accuracy ±0.2%, Narrow housing, 22.5 mm.

Frequency Transducer Rish Con Hz

Frequency Transducer Rish Con Hz

Rishcon-Hz where output signal is proportional to measured frequency with1 or 2 analog output load dependent Vdc or independent Idc. Universal Aux with accuracy ±0.2%. Onsite input, output configurable, 7 Segment LCD Display, RS485 (Modbus) communication.

Current/Voltage Transducer - Con I/Con V

Current/Voltage Transducer - Con I/Con V

Rishcon-V/I measures and convert AC V or I of RMS input signal to proportional 1or2 analog output load dependent Vdc or independent Idc. Universal Aux with accuracy ±0.2% & TRMS measurement. Onsite input output configurable, 7Segment LCD Display, RS485 communication.

Rish Master 3440

Rish Master 3440

Multifunction TRMS meter with 61 parameters in a 3ph network V, I, F, In, KW, KVAr, KVA, Phase Angle, PF, %THD, demand & max demand (I, kVA, Imp&Exp kW) run hr, on hr, interrupt, KVAh, Imp & Exp KWh, KVArh Optional modbus, relay & analog o/p  

Rish Master 3430

Rish Master 3430

Multifunction meter with TRMS measurement, measures distorted waveform up to 15th harmonic and 48 electrical parameters in a 3 phase network (V, I, F, In, kW, kVAr, kVA, Phase Angle, PF , %THD, KVAh, Imp & Exp kWh, kVArh) Optional MODBUS (RS485), Pulse & Analog o/p

Rish Master 3428

Rish Master 3428

Multifunction meter with TRMS measurement, measures distorted waveform up to 15th harmonic and up to 32 electrical parameters in a 3phase network (V, I, F, In, KW, KVAr, KVA, Power Factor, KWh, KVArh & KVAh ) Optional MODBUS (RS485) o/p

Dual Source Energy Meter - EM3490DS

Dual Source Energy Meter - EM3490DS

Dual Source Energy Meter (EB & Genset). The Meter records the Energy count, run hr, on hr, interruptions & stores the old Energy separately for both the sources with 2 separate displays for EB & Genset. CT/PT primary programmable. Optional MODBUS (RS485) & pulse o/p

Counter type Energy Meter - EM3490

Counter type Energy Meter - EM3490

96x96 size panel mounted Mechanical Counter type Energy Meter with pulse o/p. Most suitable for the secondary metering with CT primary programmable, available in class 1 & 0.5 accuracy

Electronic Energy Meter - EM3490SS

Electronic Energy Meter - EM3490SS

96x96 size panel mounted Digital Energy Meter. Most suitable for the secondary metering with CT/PT primary programmable, available in class 1 accuracy. Optional MODBUS (RS485) & pulse o/p

4 digit fully programmable AC Ammeter/Voltmeter (48x96/96x96)

4 digit fully programmable AC Ammeter/Voltmeter (48x96/96x96)

TRMS 4 digit fully programmable Digital Panel Meter, measures AC Current / Voltage in a single / three phase network, available in 48x96 / 96x96 size. Universal features like I/P: V-100 to 500VLL programmable, I-1/5A selectable, Aux: 40 to 300V AC/DC, click fit arrangement

RISH EM 1320/30/40

RISH EM 1320/30/40

RISH EM series is specially designed for Active, Reactive and Apparent Energy Measurement including per phase THD, Powers and others parameters as per different models.

RISH EM 2340DS

RISH EM 2340DS

Dual Source Energy Meter for Energy Monitoring :  RISH EM 2340DS is a compact True RMS energy meter, specially designed for measurement of Active, Reactive and Apparent Energy including per phase THD, Power and others important electrical parameters.  

NA6 (Bargraph)

NA6 (Bargraph)

NA6 is a Vertical type Bar graphs with 2 independent channels in 3 or 7 colour with programmable switch over. Recording of 750 measuring segments. Universally programmable input. Up to 8 programmable alarm outputs. Communicates over RS485 and has analog and relay output. Size 48x144x100 mm.

Rish Delta Energy

Rish Delta Energy

Universal features like I/P 100-500VLL programmable, Aux 40-300V AC/DC, click fit arrangement, measures V, I, F, φ, PF, W, VA, VAr, Demand & Max Demand (I, VA, Imp & Exp W), RPM, run hr, on hr, Interrupt, Min/Max V & I, VAh, Imp & Exp Wh, VArh Optional RS485/Relay o/p

Rish Delta Power

Rish Delta Power

Universal features like I/P – 100 to 500VLL programmable, Aux.: 40 to 300V AC/DC, click fit arrangement, measures 38 electrical parameters in a 3 Ph Network (V, I, F, Phase Angle, PF, kW, kVA, kVAr, RPM, run hr, on hr, Interruption, Min/ Max V & I) Optional RS485/Relay o/p

Rish Delta VAF

Rish Delta VAF

Universal features like I/P-100 to 500VLL programmable, Aux- 40 to 300V AC/DC, click fit arrangement, TRMS measurement, measures distorted waveform up to 15th harmonic, measures 18 electrical parameters in a 3 Ph. Network (V, I, F, RPM, run hr, on hr, Interupt, Min/Max V&I)

Rish EINE

Rish EINE

4 digit Digital Panel Meter Rish Eine DPM Measures important electrical parameters in 3 Phase 4 Wire , 3 Phase 3 Wire & single phase network & replaces the multiple analog panel meters. PT / CT primary onsite programmable.

NA5 (Bargraph)

NA5 (Bargraph)

NA5 is a single channel 3 or 7 colour bargraph with programmable switch over. Recording of 750 measuring segments, released temporary. Universally programmable input. Up to 8 programmable alarm outputs. Communicates over RS485 and has analog and relay output. Size 48x144x100 mm.

RISH Master 3480 - Touch Screen Graphics LCD

RISH Master 3480 - Touch Screen Graphics LCD

Multifunction Meter with Touch screen LCD TRMS measurement 3ph & 1ph network V, I, F, KW, KVAr, KVA, %THD, demand & max demand (I, kW, kVA,) run hr, on hr, interrupt, KVAh, Imp & Exp KWh, Optional modbus, relay & analog o/p

NA3 (Bargraph)

NA3 (Bargraph)

NA3 are Horizontal type bar graphs with universal input available in 3 or 7 colours. Linear characteristics. Programmable as one colour/ interval/ sector/ point or trend type bar graph. Conforms to European Norms and is CE approved. Very sleek size: 96x24x125 mm.

N30 Series

N30 Series

N30 (H, O, P, U) programmable meters. These have 5 Digit ultra bright LED display and is site programmable through keys or LP Config software. Safety and compatibility compliance is according to European Norms & is CE approved. Available in 48 x 96 mm size.

N25 Series

N25 Series

N25 Series are 5-Digit digital meter with ultra bright LED display ( Multi-colours). AC/DC inputs. Parameter programmable through LPConfig software with on-site programmable feature. Conforms to European Norms & CE approved. Size 48 x 96 mm.

4 1/2 digit R Series AC Volt Meter

4 1/2 digit R Series AC Volt Meter

4 1/2 Digit LCD digital panel meters RISH R412 have been designed for industrial applications, which frequently require precise and on-site adjustment of the display range.

3 1/2 digit R Series AC/DC Digital Panel Meter

3 1/2 digit R Series AC/DC Digital Panel Meter

3 1/2 Digit LCD /LED  digital panel meters RISH R312 have been designed for industrial applications, which frequently require precise and on-site adjustment of the display range.

4 1/2 digit 1

4 1/2 digit 1" display DC Ammeter/Volt Meter (72x144)

Digital Panel Meter in 72x144size with 41/2  digit 1 inch display Digital AC Ammeter / Voltmeter, suitable for wide range of measuring applications where precise onsite adjustment of the display range is frequently required. Wide range of inputs available.

4 1/2 digit DC Ammeter/Volt Meter (48x96/96x96)

4 1/2 digit DC Ammeter/Volt Meter (48x96/96x96)

41/2  digit Digital DC Ammeter / Voltmeter available in 48x96 / 96x96 size, suitable for wide range of measuring applications where precise onsite adjustment of the display range is frequently required. Wide range of inputs available suitable for almost any input requirement.

3 1/2 digit DC Ammeter/Volt Meter/ Temperature DPM (48x96)

3 1/2 digit DC Ammeter/Volt Meter/ Temperature DPM (48x96)

Digital Panel Meter 48x96 size 31/2  digit DC Current / Voltage / Temperature, suitable for wide range of measuring applications where precise onsite adjustment of the display range is required. Wide range of inputs available suitable for almost any input requirement.

3 1/2 digit DC Ammeter/Volt Meter (24x96)

3 1/2 digit DC Ammeter/Volt Meter (24x96)

Sleekest Digital Panel Meter 24x96 size 31/2  digit DC Ammeter / Voltmeter, suitable for wide range of measuring applications where precise onsite adjustment of the display range is required. Wide range of inputs available suitable for almost any input requirement.

3 1/2 digit DC Ammeter/Volt Meter (24x48)

3 1/2 digit DC Ammeter/Volt Meter (24x48)

Smallest Digital Panel Meter 24x48 size 31/2  digit DC Ammeter / Voltmeter, suitable for wide range of measuring applications where precise onsite adjustment of the display range is required. Wide range of inputs available suitable for almost any input requirement.

4 1/2 digit 1

4 1/2 digit 1" display AC Ammeter/Volt Meter (72x144)

Digital Panel Meter in 72x144size with 41/2  digit, 1inch display Digital AC Ammeter / Voltmeter, suitable for wide range of measuring applications where precise onsite adjustment of the display range is frequently required. Wide range of inputs available.

3 1/2 digit 20A AC/DC Ammeter (48x96)

3 1/2 digit 20A AC/DC Ammeter (48x96)

Digital Panel Meter 48x96 size 31/2 digit 20A Direct AC / DC Ammeter, suitable for wide range of measuring applications where precise onsite adjustment of the display range is frequently required. The chosen input range is adjustable over a wide range, 5-100% of the full scale

4 digit Power & Power Factor DPM (72x144)

4 digit Power & Power Factor DPM (72x144)

4 digit Digital Panel Meter 72 X 144 series which measures kW / kVAr / kVA  or PF in a single or three phase system where  1Ph / 3 Ph 3Wire / 3Ph 4Wire is onsite selectable. PT / CT primary onsite programmable.

4 digit Power & Power Factor DPM (96x96)

4 digit Power & Power Factor DPM (96x96)

4 digit Digital Panel Meter which measures Power or Power factor in a single or three phase system where  1Ph / 3 Ph 3Wire / 3Ph 4Wire is onsite selectable. PT / CT primary onsite programmable.