...

Rish CON TPT (96 X 96)

Programmable input tap resistance(2/3/4 wire measurement) upto 25kOHM is converted to proportional 1 or 2 analog o/p signal either Idc or Vdc, Universal AC/DC aux With LED Display.

...

RISH PI-102

The purpose of the RISH PI-102 is to electrically isolate input, outputs and power supply. The isolator fulills all requirements and regulation concerning electromagnetic compatibility EMC and safety (IEC61326-1 and IEC 61010-1:2010).

...

P20H

Destined for continuous conversion of high I/ V signals to standard D.C I/ V output signal. Small dimensions. 0.2 accuracy class. Fully prog. parameters: measurement avg. time, Conversion characteristic, preservation of the output signal at over. flows, RS-485 transmission parameters.

...

P17G

A current loop separators. These are very thin (6.2mm) hence acquire less space and fit easily in the cabinet. P17 intakes input from temperature sensor/ DC voltage/ resistance and P17G input is DC current. Galvanic isolation between input and output in P17G.

 

...

P17

A current loop separators. These are very thin (6.2mm) hence acquire less space and fit easily in the cabinet. P17 intakes input from temperature sensor/ DC voltage/ resistance and P17G input is DC current. Galvanic isolation between input and output in P17G.

...

Isolating Amplifier Rish ducer TV808

DC isolating amplifier to electrically insulate i/p & o/p signals at2.3KV &power supply at3.7KV or amplify the signal levels in 252 i/p [0..1000V, ±20mA, ±20V] o/p [±20mA, ±10V] combinations selected by soldered jumpers, RLoad Max600 OHM  Accuracy±0.2%

...

Passive DC Signal Isolator Rish ducer TI807 (1,2,3 Channel)

Electrically insulates 1,2,3channel analog DC signals i/p range0(4)…20mA & o/p range 0(4)…20mAor 0(2)…10V RLoad max500 OHM self powered Accuracy ±0.2% Insulation 3.7KV Prevents transfer of interferenceV&I, solves grounding problem in meshed signal network

 

...

Passive DC Signal Isolator Rish ducer TI816

Electrically insulates analog DC signals, i/p range 0(4)…20mA & o/p range 0(4)…20mA or 0(2)…10V, RLoad max 500 OHM, self powered, Accuracy ±0.2%, Prevents the transfer of interference V&I, solves grounding problems in meshed signal network

...

Configurable Transmitter Rish ducer PT602

Converts input variable a signal from Pt 100 at Temp (170 - 800°C) to linear output signal. Version 2,3,4 wire connections 1,2 channel i/p o/p, Measuring ranges configurable with DIP switches. Universal AC/DC aux Accuracy±0.5%, Insulation 3.7KV, Sensor open/short circuit indicator

...

Programmable Tap position Transducer Rish ducer TP-25K

Onsite Programmable input tap resistance (2/3/4/WF/WF/DIN) upto 25kOHM is converted to proportional 2 analog o/p signal either Idc or Vdc, simulation facility, detects open circuit, output charact. linear or A=Square root of M, or M to power of 3/2. Universal AC/DC aux

...

Programmable Universal Transmitter Rish ducer V604

Onsite Programmable universal transmitter Converts input Idc or Vdc, Thermocouple, RTD or remote sensor to a proportional 2 analog o/p signal. Open circuit sensor supervision, trip point setting(-10to110%) Universal AC/DC Aux. Accuracy ±0.2% Automatic calibration for lead compensating

...

RISH CON SI-102 (Dual output DC isolator )

Rish CON SI-102 Two electrically isolated analog outputs prevent interference voltage and current. Solves grounding problem in meshed signal networks.The device has one input and provides two independent outputs in an extremely small space.

...

Programmable Tap position transducer Rish CON TPT

Programmable input tap resistance(2/3/4 wire measurement) upto 25kOHM is converted to proportional 1 or 2 analog o/p signal either Idc or Vdc, Universal AC/DC aux With LED Display.

...

Rish CON SI 101 - Powerful DC Signal Isolator

Powerful DC Signal Isolator - Rish CON SI101 electrically isolates the input, output & power supply The isolator fulfills all the requirements concerning EMC and safety (IEC 61010).Onsite selectable DIN rail & wall mounting