Multi Transducer - Rish CON M

Multi Transducer - Rish CON M

Datasheet

* True RMS measurement
* Fully onsite programmable input PT & CT ratio
* Detection and signaling of incorrect phase sequence
* THD Measurement
* Programmable parameters through the RS-485 interface or USB when using the free eCon configuration software
* Onsite selectable analog output range (0...20mA/4...20mA/-20...+20mA)
* Fast and easy installation on DIN RAIL or onto a wall or in a panel using optional screw hole bracket
* Connection Terminal : Conventional Screw type
 
Measuring Input
AC Voltage/Current input signal,sine wave or distorted wave form
 
Analog Output 
Analog output which can be set in between -20mA....20mA onsite. Admissible overflow on analog output: 20% of lower and upper value
 
Programmable CT/PT Ratio
The Transducer can be programmed onsite using through RS 485 or USB port.
 
Energy Measurement
Tetraquadrantic energy measurement (Ep+, Ep-, EqL, Eqc)
 
LED Indication
LED indication for power on,RS485 transmission, reception and alarm switching
 
USB Communication
USB communication is available. For reading measured parameters & onsite configuration of input/output.
 
RS 485 Communication 
RS485 communication is available. For reading measured parameters & onsite configuration of input/output.
 
Mean Active Power 
Measurement of 15, 30 or 60 minutes’ mean active power (synchronization by an internal clock or a walking window) with the archiving function of 1000 last samples
 
Pulse constant of OC type output
5000-20000imp./KWh, independently on setting of ratios Ku,Ki
 
Alarm Indications
The alarm indication can be set for measured input parameter