Isolators

RISH PI-101

The purpose of the RISH PI-101 is to electrically isolate input, outputs and power supply. The device has one input and provides one independent output.

Rish CON TPT (96 X 96)

Programmable input tap resistance(2/3/4 wire measurement) upto 25kOHM is converted to proportional 1 or 2 analog o/p signal either Idc or Vdc, Universal AC/DC aux With LED Display.

The purpose of the RISH PI-102 is to electrically isolate input, outputs and power supply. The isolator fulills all requirements and regulation concerning electromagnetic compatibility EMC and safety (IEC61326-1 and IEC 61010-1:2010).

Isolating Amplifier Rish ducer TV808

DC isolating amplifier to electrically insulate i/p & o/p signals at2.3KV &power supply at3.7KV or amplify the signal levels in 252 i/p [0..1000V, ±20mA, ±20V] o/p [±20mA, ±10V] combinations selected by soldered jumpers, RLoad Max600 OHM Accuracy±0.2%

Configurable Transmitter Rish ducer PT602

Converts input variable a signal from Pt 100 at Temp (170 - 800°C) to linear output signal. Version 2,3,4 wire connections 1,2 channel i/p o/p, Measuring ranges configurable with DIP switches. Universal AC/DC aux Accuracy±0.5%, Insulation 3.7KV, Sensor open/short circuit indicator

Programmable Universal Transmitter Rish ducer V604

Onsite Programmable universal transmitter Converts input Idc or Vdc, Thermocouple, RTD or remote sensor to a proportional 2 analog o/p signal. Open circuit sensor supervision, trip point setting(-10to110%) Universal AC/DC Aux. Accuracy ±0.2% Automatic calibration for lead compensating

Isolators

RISH PI-101

Rish CON TPT (96 X 96)

RISH PI-102

Isolating Amplifier Rish ducer TV808

Configurable Transmitter Rish ducer PT602

Programmable Universal Transmitter Rish ducer V604

RISH CON SI-102 (Dual output DC isolator )

Programmable Tap position transducer Rish CON TPT

Rish CON SI 101 - Powerful DC Signal Isolator