RISH LM1340 measures important electrical parameters in 3 phase 4 wire, 3 phase 3 wire, and 1 phase 2 wire Network. The instrument has two optional digital outputs. This instrument also has two optional digital inputs for monitoring the external contact status, pulse counting, and tariff.
Rishabh Insulation Tester Rish Insu 5Dt is a 5KV Digital Insulation Tester with selectable test voltage upto 5KV and Insulation Resistance measurement upto 2 TΩ. Ideal for insulation testing of cables, motors and transformers. It comes with a facility to measure PI, DAR, Step Voltage, Ramp test.
Rishabh Insulation Tester Rish Insu 5Dx+ is a Digital Insulation Tester with selectable test voltage upto 5kV and Insulation Resistance measurement upto 10 TΩ. Ideal for testing insulation in live switchyards. It comes with PI, DAR, DD & conduct Step Voltage, Ramp test, Burn/Breakdown test.
RISH ML 14xx measures electrical parameters in 3 phase 4 wire, 3 phase 3 wire and 1 phase 2 wire Network. Parameters at a glance for 12 single phase loads or 4 three phase load option, it has 4 relay outputs for Limit/Pulse/RCM/3Phase Load Health Monitoring/Tariff/RTC/Timer tripping or alarms.
marc Configuration Utility is a application for Rishabh products for reading and programming devices. marc Configuration Utility works on two communication types, Serial and TCP/IP for a single device at a time. Both communication types have 2 operating mode each, read or write.
RISH Relay - AR monitors AC current of a system/equipment and protects it from overcurrent, undercurrent and current unbalance. As well as it indicates the occurrence of faults with help of LED indications. It is a potentiometer based relay thus it is easy to programme trip points and time delays
RISH Master 3440 is a class 0.2S as per IEC 62053. It measures more then 46 important electrical parameters of 3Ph. /1Ph. system along with THD & individual harmonics up to 31st. It can communicate through ethernet /RS485 with external device, and it also have Pulse O/P and 4-20mA analog O/P.
RISH Master 3440i is a class 0.2S as per IEC 62053-22. It measures more than 46 important electrical parameters in 3Ph3/4W & 1PH2W system along with THD & individual harmonics upto 31st. RISH Master 3440iDL has 8MB flash for datalogging
Rishabh’s new RISH Cam Reverse Forward Switch offers a wide application in motor controlling with maximizing benefits. These switches have wide application in motor control for changing the direction of rotation in Forward and Reverse way with 2 pole and 3 pole options.
RISH LM1360 measures important electrical parameters in 3P4W,3P3W & 1P2W like Active / Reactive / Apparent energy, power and all basic parameter.The instrument has two optional outputs. It can be configured as pulse output for energy measurement, limit output , timer function and RTC relay.
Spring Return Switches provide contacts that are held closed only when the switch is turned against the mechanism spring. The mechanism returning the contacts to their original state upon release of the actuator. This type of switches are known as ''Momentary switches''.
RISH DMCi is a smart Demand Monitor and Controller which is specifically designed for industries to keep a check on their maximum demand by controlling Active, Reactive, Apparent or Current demand within the allowed Limits which helps to save Money on Utility bills for Industries
The new Rishabh Young and Rishabh iYoung Multimeter are compact, Handy & Trendy multimeters specially targeted for applications of Electrical contractors, Service Industry, Technicians, HVAC and also the education sector i.e., students who will be the future of tomorrow
The 6016 new multimeter is made for professional use that offers large range count,reliability, ruggedness, a complete tool for test automation, 100KHz Bandwidth and is equipped with 30 different measuring functions alongwith data logging facility & plug and play USB for connection with PC
The 6015 new multimeter is made for professional use that offers safety, large range count,reliability, ruggedness, a complete tool for test automation and is equipped with more than 30 different measuring functions alongwith data logging facility & plug and play USB for connection with PC
RISH XMER Sigma Summation CTs are designed to summarize several synchronous Alternating Currents of equal phase relation. They are used to add secondary currents of several main CTs in order to measure with one CT only. That means the primary currents are added & divided by the number of inputs
The 6013 new multimeter is made for professional use that offers safety, high resolution, large range count, reliability, ruggedness, a complete tool for test automation and is equipped with many different measuring functions along-with option of plug and play USB for connection with PC
The 6012 new multimeter is made for professional use that offers safety, high resolution, large range count,reliability, ruggedness, a complete tool for test automation and is equipped with more than 30 different measuring functions along-with option of plug and play USB for connection with PC
FQ72 & FQ96 frequency meters measure frequency in the range of 45 to 65Hz with the help of thin steel strips called reeds placed in a row on a steel plate. The meter is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).
ZQ96 2in1 meters measure two different ranges of frequencies in the range of 45 to 450Hz. For maximum accuracy, the essential measuring range is obtained by suppressing unwanted frequency span. The meter is housed in UL94V-0 approved polycarbonate case and can be mounted in Mosaic mounting.
BM 48/72/96 meters measure maximum demand current and EB 72/96 meters measure instantaneous & maximum demand current. These meters are having unique feature of Scale Interchangeability, housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).
LML96 & LML144 Power meters measure active & reactive power with a better resolution. It is suitable to indicate forward (export / outgoing) and reverse (import/incoming) power flow. The meter is housed in UL94V-0 approved polycarbonate case and can be mounted in Mosaic mounting.
DSL48, DSL72, DSL96 and DSL144 Moving Coil meters measure average DC Voltage or DC Current with a better resolution. These meters are having unique feature of Scale Interchangeability, housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).
FM48, FM72, FM96 & FM144 Frequency meters measure frequency in the range of 45 to 450Hz. For maximum accuracy, the essential measuring range is obtained by suppressing unwanted frequency span. It is housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting.
DG48, DG72, DG96 and DG144 Moving Coil with rectifier meters are calibrated to measure AC Voltage or AC Current. These meters are having unique feature of Scale Interchangeability, housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).
DS48, DS72, DS96 and DS144 Moving Coil meters measure average DC Voltage or DC Current. These meters are having unique feature of Scale Interchangeability, housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).
DGL48, DGL72, DGL96 and DGL144 Moving Coil with rectifier meters are calibrated to measure AC Voltage or AC Current with a better resolution. These meters are having unique feature of Scale Interchangeability, housed in UL94V-0 approved polycarbonate case.
The Temperature trip relay has been designed to monitor three separate temperature zones in large electric motors, transformer winding or any temperature conscious equipment such as process lines gas turbines or engine driven generating sets, using Resistance Temperature Detectors (RTDs).
The programming cable PRKAB 600 serves to connect Rishducer V604, TP-25K transducers to a PC on which PC software is installed for purposes of programming the transducer. Cable provides electrical insulation between the PC and the transducer. Transmitter prog. connector FCC-68 and ancillary cable.
DE48, DE72, DE96 and DE144 Moving Iron meters measure true rms AC Voltage or AC Current. These meters are having unique feature of Scale Interchangeability, housed in UL 94 V-0 approved polycarbonate case and can be mounted in Mosaic mounting (cascading).
3¾ digit 1000A/300A Clamp meter measures Aac Vac Vdc F ? continuity Hz Dutycycle °C, at awkward positions of bus-bars, conductors difficult to access.180°rotating clamp jaws with 55/50mm Jaw opening Backlite display Auto/Manual mode,Double moulded soft touch cover & firm grip
HV insulation tester used for measurement from 10Kohm-1Teraohm with selectable test voltage upto 5KV. Voltage measurement upto 2.5KV AC/DC. Confirms to IS 2992(EN 61557) IP52, EMC. Available in Mains, rechargeable battery and crank operated. Guard terminal for elimination of surface current
Used for data (Logging, Processing, Analysis & Recording) storing off/online & transmission of data to PC in Online mode via RS232 Interface. Simultaneous viewing of 6 Rishmulti SI232 adapters in datalogger mode. Sampling rate 50ms-1Minute.128KB memory can store data upto 200,000 readings
The protector de-energizes a relay should any one of the above faults occur. It is fitted with an adjustable time delay to eliminate premature operation on short duration supply fluctuations. A red LED indicates that the supply is within limits & that the output relay is energised.
Analog digital Insulation & continuity tester for measure of 10Kohm-2Gohm with selectable test voltage upto 1000V. LR measurement from 0.01-99.9 ohm & upto 600V AC/DC. Storage of Min, Max & last 50 readings. Preselectable measurement time, stop watch, fuse blow, auto power off
The AC Current provides continuous surveillance of the monitored circuit. When the measured current moves outside the set point limit, the relay will operate. An adjustable time delay is provided to prevent the relay from tripping for a predetermined period to prevent nuisance tripping.
Marc is our Next Generation IIOT Platform with build-in apps for assets & equipment for managing up-time, efficiency, productivity, condition monitoring, control, preventive & predictive maintenance for demand-side management of system and process parameter monitoring.
Analog Digital Insulation & continuity tester for measure of 10Kohm-999Mohm with selectable test voltage upto 1000V. LR measurement from 0.01-99.9 ohm & upto 600V AC/DC. Storage of Min, Max & last 50 readings. Preselectable measurement time, stop watch, fuse blow, auto power off
SM5 is a module of logic inputs. Transferring information of machine state to monitoring systems and PLC. 8 relay logic inputs read out through RS-485/Modbus. Fixing on a TS35 rail. Signaling of input states on LED diodes. Full galvanic isolation. Configuration through the free LPConfig software.
Rish TW series round CTs are round in shape & encapsulated with UL94V-0 approved polycarbonate. These CTs have terminals for secondary connections & feature wide range of primary current ratings, Bus bar sizes, case widths. They are having wall, cable & bus bar mounting options
RishTW-E series round CTs are cost effective, round in shape & encapsulated with UL94V-0 approved polycarbonate. These CTs have wires with lugs for sec. connections & feature wide range of system current ratings, Busbar sizes,case widths.They have wall, cable & bus bar mounting options
Rish Protection class CTs are square & round type encapsulated with UL94V-0 approved polycarbonate.These CTs used for protection purpose (acc class 5P10, 10P10 etc)& features wide range of primary current ratings, Busbar sizes,case widths,having wall, cable, bus bar & DIN rail mountings
Rish X’mer CTs are square type and encapsulated with UL94V-0 approved polycarbonate. Metering CTs feature with wire sealable terminal covers & wide range of primary current ratings, Bus bar sizes, case widths. Wall, cable, bus bar & DIN rail mounting options available.
N30B is 3 colour LED disp. digital meter. Records & reads data from devices with RS485 & MODBUS. 21 point individual characteristics. Internal Memory-350064 records. PC data archiving in MYSQL DB. RTC with day light saving time (DST) automatic adjustment. Size: 48 x 96 mm.
LCD Touch Screen with user interface panel. Comes with 3/ 6 programmable input channels. Have 6/ 12 alarm outputs and 4/ 8 digital outputs. Visualization of measurements in graphical forms. Compatible with MS windows CE operating System. CE Approved and safety as per European Norms.
LCD Touch Screen with user interface panel. Comes with 3/ 6/ 9/ 12 programmable input channels. Have 6/ 32 alarm outputs, 8/ 16 digital outputs and 4 or 8 analog outputs. Visualization of measurements in graphical forms. Compatible with MS windows CE operating System. Diversified user rights.
Converts input variable a signal from Pt 100 at Temp (170 - 800°C) to linear output signal. Version 2,3,4 wire connections 1,2 channel i/p o/p, Measuring ranges configurable with DIP switches. Universal AC/DC aux Accuracy±0.5%, Insulation 3.7KV, Sensor open/short circuit indicator
Onsite Programmable universal transmitter Converts input Idc or Vdc, Thermocouple, RTD or remote sensor to a proportional 2 analog o/p signal. Open circuit sensor supervision, trip point setting(-10to110%) Universal AC/DC Aux. Accuracy ±0.2% Automatic calibration for lead compensating
Rishducer E13 convert a 3 sine waves AC voltage (upto 750V) or Current (upto 10A) of sine waveform into proportional 3 analog output load dependent Vdc or independent Idc based on arithmetical mean value measuring, calibration to RMS with sine waveform, AC or DC Aux supply
M01 is a programmable with RS485 bus interface, enable users to determine and supervise several parameter of electric power system with Modbus (RS485), power system Simulation, acquisition of meter data, password protect, 4 integrated energy meters, mark setting. Universal aux
M40/30 simultaneously measure several variables of electric power system and converts them into 3 or 4 analog output, Modbus (RS485) communication, output &power system simulation, acquisition of meter data, password protect, 4 integrated energy meters, mark setting, universal Aux
Mxx series simultaneously measure several variables of electric power system converting them into 2,3 or 4 analog output, 2 or 4 digital output for signaling limits, power metering, limit output AND/OR, Output Simulation, acquisition of meter data, mark setting with universal supply
Rishcon-V/I measures and convert AC V or I of RMS input signal to proportional 1or2 analog output load dependent Vdc or independent Idc. Universal Aux with accuracy ±0.2% & TRMS measurement. Onsite input output configurable, 7Segment LCD Display, RS485 communication.
Dual Source Energy Meter (EB & Genset). The Meter records the Energy count, run hr, on hr, interruptions & stores the old Energy separately for both the sources with 2 separate displays for EB & Genset. CT/PT primary programmable. Optional MODBUS (RS485) & pulse o/p
TRMS 4 digit fully programmable Digital Panel Meter, measures AC Current / Voltage in a single / three phase network, available in 48x96 / 96x96 size. Universal features like I/P: V-100 to 500VLL programmable, I-1/5A selectable, Aux: 40 to 300V AC/DC, click fit arrangement
Digital Panel Meter in 72x144size with 41/2 digit 1 inch display Digital AC Ammeter / Voltmeter, suitable for wide range of measuring applications where precise onsite adjustment of the display range is frequently required. Wide range of inputs available.
41/2 digit Digital DC Ammeter / Voltmeter available in 48x96 / 96x96 size, suitable for wide range of measuring applications where precise onsite adjustment of the display range is frequently required. Wide range of inputs available suitable for almost any input requirement.
Digital Panel Meter in 72x144size with 41/2 digit, 1inch display Digital AC Ammeter / Voltmeter, suitable for wide range of measuring applications where precise onsite adjustment of the display range is frequently required. Wide range of inputs available.