More power: “Power Boost”
This features allows the use of a smaller size unit to power demanding loads such as motors, solenoid valves, lamps and other loads with transient overload behavior which would otherwise required an oversize power supply.
This is the default factory setting of all FLEX units. In case of short-circuit or overloading, the output current is interrupted. The device tries again to re-establish output voltage and normal condition about every 2 second till the problem is cleared.
“Continuous output mode”
In case of short –circuit or overload, the output current is kept at high values with near zero voltage. In case of short circuit the current can reaches up to 3 times the rated current at 60ºc. This protection mode is used to meet the requirements of demanding loads such as motors, solenoid valves, lamps, PLC with highly capacitive input circuits and other loads with marked transient overload behavior.
Manual restart by operator
In case of short-circuit or overload, the output current is interrupted. In order to restart the output it is necessary to switch-off the input circuit for about 1 minute.
This protection mode is particularly suggested in application where safety procedures require that reset be carried out only be an authorized person.
“Power Good” relay for monitoring the output voltage level
Output voltage is continuously monitored.This feature is particularly useful in redundant applications.
* Input: single-phase: 115 – 230 Vac
* Output: 24 Vdc 60°C
* Efficiency up to 92%
* Strong overload without switch-off, up to 50%
* Flexible Power continuity : from 480 to 600W
* DIN Rail Mountable
* Extremely small size
* 3 Year warranty