Product FeaturesUnique Design
RISH Clamp ES1000 AC/ES400 AC is a highly innovative design for features those increases safety and comfort of user.
? Rotating clamp jaws facilitate the measurement at physically awkward positions, vertical bus bars, conductors placed at positions difficult to access.
? Clamp jaws can be opened or closed with the trigger placed at bottom side away from the jaws. This allows the user to place
his/her hand at safer distance from live conductor. This greatly reduces exposure of human beings to electrical shocks
Large Jaw Opening
For RISH Clamp ES1000 AC Jaw opening of 51mm for standard
Narrow Body
Narrow housing for firm grip and easy to carry.
High Accuracy for low current measurement
The clamp meter can measure accurately at not only the High currents but also Low current ranges.
User selectable Backlit
It is possible to conduct measurement using the clamp meter during night time in darkness with the help of Backlit.
Temperature measurement
Temperature from 0 to 1300 °C using K type thermocouple sensors.
AUTO POWER OFF
In order to save the power of the Batteries, the clamp meter will automatically shut OFF if it detects no activity for 15 minutes.
Relative Measurement
By pressing REL key, the zero correction is made and relative wire diameter of 50mm and for RISH Clamp ES400 AC Jaw opening of 41mm for standard wire diameter of 40mm for 400A
Hold Function
By pressing HOLD key reading on the display can be latched. Simultaneously HOLD is displayed on display.
Hz / Duty
The instrument can measure frequency (Hz) and Duty cycle (%) of AC voltage by pressing yellow key in VAC function.
NULL ZERO Correction for Resistance
For Low ohm measurement, the lead resistance can be compensated by pressing REL key.
AUTO and MANUAL ranging modes
In AUTO ranging mode the instrument automatically selects the range with best resolution depending on the applied input. In MANUAL ranging mode range is user selectable using MAN key.
Protection from dust and water
IP20 for terminals as per IEC60529
Applicable International Safety standards
600 V CAT III/1000V CAT II as per International Safety standard
IEC 61010-1- 2010
Double moulded Cover for soft touch and firm grip of the Instrument
Diode and continuity testing
For testing diode and transistors, diode measurement function is available. Continuity test generates beep sound if resistance is less than 75 ohm
Non contact voltage (NCV) detection
Presence of AC voltage >75 V AC 50/60 Hz can be detected by keeping jaws near voltage carrying conductor.
|
