Rishabh Instruments Limited | Rish CON M

Rish CON M - Multi Transducer

The RISH CON - M transducer is used to measure and convert parameters of Three-phase 3W/4W AC Bal./Unbal. It ensures that the measurement and conversion of measured values into standard analog current signals. Relay / Pulse outputs.

Download & Share

True RMS measurement
Fully onsite programmable input PT & CT ratio
Detection and signaling of incorrect phase sequence
THD Measurement
Programmable parameters through the RS-485 interface or USB when using the free eCon configuration software
Onsite selectable analog output range (0...20mA/4...20mA/-20...+20mA)
Fast and easy installation on DIN RAIL or onto a wall or in a panel using optional screw hole bracket
Connection Terminal : Conventional Screw type

Measuring Input

AC Voltage/Current input signal, sine wave or distorted wave form

Analog Output

Analog output which can be set in between -20mA....20mA onsite. Admissible overflow on analog output: 20% of lower and upper value

Programmable CT/PT Ratio

The Transducer can be programmed onsite using through RS-485 or a USB port.

Energy Measurement

Tetraquadrantic energy measurement (Ep+, Ep-, EqL, Eqc)

LED Indication

LED indication for power on,RS485 transmission, reception and alarm switching

USB Communication

USB communication is available. For reading measured parameters & onsite configuration of input/output.

RS 485 Communication

RS485 communication is available. For reading measured parameters & onsite configuration of input/output.

Mean Active Power

Measurement of 15, 30 or 60 minutes’ mean active power (synchronization by an internal clock or a walking window) with the archiving function of 1000 last samples

Pulse constant of OC type output

5000-20000imp./KWh, independently on setting of ratios Ku,Ki

Alarm Indications

The alarm indication can be set for measured input parameter

People Also Look For

Crafted with precision and reliability, our products ensure top performance and durability. Experience excellence with every measurement.

View All

Rish CON I11

Rish CON-I11 measures and converts the AC I input signal to proportional analog output load-dependent IDC or independent VDC. Self-auxiliary power supply with an accuracy of ±0.5%.

Rish CON M+ : Multi Function Transducer

Rish COM-M+ transducer is used to measure and convert parameters of a single-phase or three-phase AC system with an unbalanced or balanced load into a proportional load-independent DC Current / Voltage output signal. It also provides digital output which can be configured for energy pulse / limit / timer

Rish CT Ducer - Current Transformers With Transducer

Current Transformers with Transducer for the measurement of AC current. Rish CT Ducer is a very reliable, efficient, and robust current transformer for the measurement of AC current. It provides 4 to 20 mA or 0 to 20 mA DC output.

Rish CON - CA/CV (Dual Output)

The transducer Rish CON-CA/CV is a dual-output transducer that converts a sinusoidal AC current or AC voltage into a load-independent DC current or a load-independent DC voltage proportional to the measured value.

Rish Ducer E13 - Current / Voltage Transducer (3 Channel)

Rish ducer E13 converts a 3 sine waves AC voltage (upto 750V) or Current (upto 10A) of sine waveform into proportional 3 analog output load dependent Vdc or independent Idc based on arithmetical mean value measuring and calibration to RMS with sine waveform, AC or DC Aux supply

Rish Ducer M01 - Programable Multifunction Transducer (RS485 - Modbus Communication)

M01 is programmable with an RS485 bus interface that enables users to determine and supervise several parameters of the electric power system with Modbus (RS485), power system simulation, acquisition of meter data, password protection, 4 integrated energy meters, and mark setting. Universal aux

Rish Ducer - M40 / M30 : Programable Multifunction Transducer

Rish Ducer M40/30 simultaneously measures several variables of the electric power system and converts them into 3 or 4 analog outputs, Modbus (RS485) communication, output &power system simulation, acquisition of meter data, password protection, 4 integrated energy meters, mark setting, universal Aux

Rish Ducer Mxx Series - Programable Multifunction Transducer

Mxx series simultaneously measures several variables of the electric power system converting them into 2,3 or 4 analog outputs, 2 or 4 digital outputs for signaling limits, power metering, limit output AND/OR, Output Simulation, acquisition of meter data, mark setting with universal supply