Rish CON P - Power Transducer
Rish con-P converts active, reactive, & apparent power of 1Ø /3Ø balanced or unbalanced loads into proportional 1 or 2 analog output load-dependent Vdc or independent Idc. Universal Aux with accuracy ±0.2%, TRMS type Onsite input/output configurable, 7 Seg LCD display, RS485
Download & shares
The Rish CON-P transducer is used to measure and convert active, reactive, apparent power, phase angle, & power factor of a single-phase or three-phase AC system with a balanced or unbalanced load into a proportional load independent DC current or voltage output signal.
Measuring Input -
AC Voltage/ Current input signal, sine wave, or distorted waveform.
Analog Output (Single or dual)
Isolated analog output which can be set to voltage or current output onsite.
Accuracy
Output signal accuracy class 0.2 as per International IEC60688 Standard.
Programmable Input/Output
The onsite transducer can be programmed using the front key & display or through a programming port or through RS 485. For transducers without display, the RS485 programming port can be used for onsite programming.
LED Indication
LED indication for power on and output type.(Current Orange LED, Voltage Green LED)
Display Module (Optional)
Optional 7 segment LCD display with backlit & keypad. For displaying measured parameters & onsite configuration of Input/output.
Rs485 Communication (Optional)
Optional RS485 communication is available. For reading measured parameters & onsite configuration of input/output.
People Also Look For
Crafted with precision and reliability, our products ensure top performance and durability. Experience excellence with every measurement.
Rish CON M+ : Multi Function Transducer
Rish COM-M+ transducer is used to measure and convert parameters of a single-phase or three-phase AC system with an unbalanced or balanced load into a proportional load-independent DC Current / Voltage output signal. It also provides digital output which can be configured for energy pulse / limit / timer
Rish Ducer E13 - Current / Voltage Transducer (3 Channel)
Rish ducer E13 converts a 3 sine waves AC voltage (upto 750V) or Current (upto 10A) of sine waveform into proportional 3 analog output load dependent Vdc or independent Idc based on arithmetical mean value measuring and calibration to RMS with sine waveform, AC or DC Aux supply
Rish Ducer M01 - Programable Multifunction Transducer (RS485 - Modbus Communication)
M01 is programmable with an RS485 bus interface that enables users to determine and supervise several parameters of the electric power system with Modbus (RS485), power system simulation, acquisition of meter data, password protection, 4 integrated energy meters, and mark setting. Universal aux
Rish Ducer - M40 / M30 : Programable Multifunction Transducer
Rish Ducer M40/30 simultaneously measures several variables of the electric power system and converts them into 3 or 4 analog outputs, Modbus (RS485) communication, output &power system simulation, acquisition of meter data, password protection, 4 integrated energy meters, mark setting, universal Aux
Rish Ducer Mxx Series - Programable Multifunction Transducer
Mxx series simultaneously measures several variables of the electric power system converting them into 2,3 or 4 analog outputs, 2 or 4 digital outputs for signaling limits, power metering, limit output AND/OR, Output Simulation, acquisition of meter data, mark setting with universal supply