Rish Ducer M01 - Programable Multifunction Transducer (RS485 - Modbus Communication)
M01 is programmable with an RS485 bus interface that enables users to determine and supervise several parameters of the electric power system with Modbus (RS485), power system simulation, acquisition of meter data, password protection, 4 integrated energy meters, and mark setting. Universal aux
Download & shares
- Simultaneous measurement of several variables of a heavy current power system / full supervision of an asymmetrically loaded four-wire power system, rated current 1 to 6 A, rated voltage 57 to 400V (phase to neutral) or 100 to 693V (phase to phase)
- For all heavy-current power system variables
- Input voltage up to 693 V (phase-to-phase)
- Universal analogue outputs (programmable)
- Transfer of data via MODBUS® interface
- High accuracy: U/I 0.2% (under reference conditions)
- Universal digital outputs (meter transmitter, limits)
- 4 integrated energy meters, storage every each 203 s, storage for : 20 years
- Windows software with password protection for programming, data analysis, power system status simulation, acquisition of meter data, and making settings
- DC-AC power pack with wide power supply tolerance/universal Provision for either snapping the transducer onto top-hat rails or securing it with screws to a wall or panel
RISH Ducer M01 is a programmable transducer with RS 485 bus interface (MODBUS®) It supervises several parameter of an electrical power system simultaneously.
The RS 485 interface enables the user to determine the number variables to be supervised (up to the maximum available). The levels of all internal counters that have been configured (max. 4) can also viewed. Provision is made for programming the RISH Ducer M01 via the bus. A standard EIA 485 interface can be used.
The transducers are also equipped with an RS 232 serial interface to which a PC with the corresponding software can be connected for programming or accessing and executing useful ancillary functions.
This interface is needed for bus operation to configure the device address, and the Baud rate and possibly increasing the message waiting time (if the master is too slow) defined in the MODBUS® protocol.
The usual methods of connection, the types of measured variables, their ratings, and the type of internal energy/metering are the main parameters that can be programmed.
The ancillary functions include a power system check and a facility for printing nameplates.
The transducer fulfills all the essential requirements and regulations concerning electromagnetic compatibility (EMC) and safety (IEC 1010 resp. EN 61 010). It was developed and is manufactured and tested in strict accordance with the quality assurance standard ISO 9001.
People Also Look For
Crafted with precision and reliability, our products ensure top performance and durability. Experience excellence with every measurement.
Rish CON M+ : Multi Function Transducer
Rish COM-M+ transducer is used to measure and convert parameters of a single-phase or three-phase AC system with an unbalanced or balanced load into a proportional load-independent DC Current / Voltage output signal. It also provides digital output which can be configured for energy pulse / limit / timer
Rish Ducer E13 - Current / Voltage Transducer (3 Channel)
Rish ducer E13 converts a 3 sine waves AC voltage (upto 750V) or Current (upto 10A) of sine waveform into proportional 3 analog output load dependent Vdc or independent Idc based on arithmetical mean value measuring and calibration to RMS with sine waveform, AC or DC Aux supply
Rish Ducer M01 - Programable Multifunction Transducer (RS485 - Modbus Communication)
M01 is programmable with an RS485 bus interface that enables users to determine and supervise several parameters of the electric power system with Modbus (RS485), power system simulation, acquisition of meter data, password protection, 4 integrated energy meters, and mark setting. Universal aux
Rish Ducer - M40 / M30 : Programable Multifunction Transducer
Rish Ducer M40/30 simultaneously measures several variables of the electric power system and converts them into 3 or 4 analog outputs, Modbus (RS485) communication, output &power system simulation, acquisition of meter data, password protection, 4 integrated energy meters, mark setting, universal Aux
Rish Ducer Mxx Series - Programable Multifunction Transducer
Mxx series simultaneously measures several variables of the electric power system converting them into 2,3 or 4 analog outputs, 2 or 4 digital outputs for signaling limits, power metering, limit output AND/OR, Output Simulation, acquisition of meter data, mark setting with universal supply