RS485 to RS232 Converter
RS485 to RS232 Converter converts RS485 signal to the RS232 signal, used for communication between the measuring instruments with RS485 o/p & PLC / SCADA / Energy Management System with RS232 input.
Download & shares
Applications
- Conversion of RS-485 signals to RS-232 signals
- SCADA systems
- PLC systems
- Process measurement and communications
- Telemetry systems
Features
- Panel Mounted - Bezel size : 48 mm x 24 mm
- Uses MODBUS protocol.
- Port powered two channel (half duplex) RS-485 to RS-232 converter.
- No external power required if two RS-232 handshake lines are available.
- The unit can be powered from +12V DC supply externally if handshake lines are not available.
- Can transmit up to 4000 feet at 115.2k baud
People Also Look For
Crafted with precision and reliability, our products ensure top performance and durability. Experience excellence with every measurement.
RS485 to USB converter
It is a compact RS485 to USB converter strip. This board is very useful for connecting a legacy RS485 device to USB port of PC. The module provides non isolated output. It adds additional COM port to a PC. It is compatible is with standard PC COM port with all hardware handshaking signals.
PRKAB 601 - Programming Cable For Rish CON Series Transducer / Rish Relay Series (Digital Relay)
The programming cable PRKAB 601 serves to connect the RISH CON Series (CON V/I/P/Hz) & RISH Relay Series (ELR/LM/V/A Relay) Transducers/Relay to a PC on which the PC software “Configuration Software—Rish CON/Relay Series” is installed for purposes of programming the transducer/relay.
MARC Configuration Utility (* Free software)
Marc Configuration Utility is an application for Rishabh products for reading and programming devices. Marc Configuration Utility works on two communication types, serial and TCP/IP, for a single device at a time. Both communication types have 2 operating modes each, read or write.
Programming Cable PRKAB 600 - For Rish Ducer V604
The programming cable PRKAB 600 serves to connect Rish ducer V604 transducers to a PC on which PC software is installed for the purposes of programming the transducer. The cable provides electrical insulation between the PC and the transducer. Transmitter prog. connector FCC-68 and ancillary cable.