Rish Ducer PT602 - Configurable Transmitter
The transmitter Rish Ducer PT 602 Converts the input variable-a signal from a resistance thermometer Pt 100 to a temperature linear output signal. The analogue output signal is either an impressed current or superimposed voltage which is processed by other devices for purposes of displaying, recording and / or regulating a constant. Versions are available with 2,3,4 wire connections, 1 and 2 channel, i/p and o/p, Measuring ranges configurable with DIP switches.
Download & shares
Features / Benefits
- Measuring ranges configurable with DIP switch and potentiometer
- Non - Standard user - specific ranges available
- Red LED's indicator : an open or short - circuit.
- Electric isolation between input & output 2.3 kV and power supply & all other circuits 3.7 kV - Fulfils EN 61 010.
- Universal (DC / AC) power supply.
- Provision for either snapping the transmitter onto top-hat rails or securing it with screws to a wall or panel.
- Housing only 17.5 mm wide (size S17) / low space requirement
- Accuracy±0.5%
The transmitter fulfil all the important requirements and regulations concerning electromagnetic compatibility EMS & safety ( IEC 1010 resp. EN 61 010). It was developed & is manufactured & tested in strict accordance with the quality assurance standard & ISO 9001.
Converts input variable a signal from Pt 100 at Temp (170 - 800°C) to linear output signal, Universal AC/DC aux , Insulation 3.7KV, Sensor open/short circuit indicator
DIP switches are provided for the coarse setting of the measuring range and the fine adjustment is accomplished using the potentiometers.
Red LED's signal an open or short-circuit feeler. In both cases, the output signal adopts its maximum value.
In the case of an current output, provision is made for switching between 0... 20 mA and 4... 20 mA.
People Also Look For
Crafted with precision and reliability, our products ensure top performance and durability. Experience excellence with every measurement.
Rish CON TPT (96 X 96)
Rish CON TPT is a Tap position transducer which coverts resistance to proportional analogue output signal. Outputs can be given as input to either RTU or indicator or recording instrument. The device has one input channel and two independent outputs. Programmable input tap resistance (2/3/4 wire measurement) upto 25kOHM is converted to proportional 1 or 2 analog o/p signal either I DC or V DC, Universal AC/DC aux With LED Display.
Rish Ducer TV808 - Isolating Amplifier
The purpose of the isolating amplifier RISH Ducer TV 808 is to electrically insulate input and output signals, respectively to amplify and / or change the signal level or type (current or voltage) of the input signals. The device has two channels and provides two independent isolating amplifiers in an extremely small space. The user has a wide choice of input and output ranges and can set the desired one with the aid of soldered jumpers (coarse adjustment) and potentiometers (fine adjustment).
Rish Ducer PT602 - Configurable Transmitter
The transmitter Rish Ducer PT 602 Converts the input variable-a signal from a resistance thermometer Pt 100 to a temperature linear output signal. The analogue output signal is either an impressed current or superimposed voltage which is processed by other devices for purposes of displaying, recording and / or regulating a constant. Versions are available with 2,3,4 wire connections, 1 and 2 channel, i/p and o/p, Measuring ranges configurable with DIP switches.
Rish ducer V604 - Programmable Universal Transmitter
The universal transmitter RISH Ducer V 604 converts the input variable – a DC current or voltage, or a signal from a thermocouple, resistance thermometer, remote sensor or potentiometer – to a proportional 2 analogue output signal. The analogue output signal is either an impressed current or superimposed voltage which is processed by other devices for purposes of displaying, recording and/or regulating a constant. A considerable number of measuring ranges including bipolar or spread ranges are available.
Rish CON TPT - Programmable Tap position transducer (DIN mounted)
Tap position transducer Rish CON TPT converts resistance to proportional analogue output signal. The purpose of the Tap position transducer is to convert tap position of transformers to equivalent analogue output. Outputs can be given as input to either RTU or indicator or recording instrument. The device has one input channel and two independent outputs. Programmable input tap resistance(2/3/4 wire measurement) upto 25kOHM is converted to proportional 1 or 2 analog o/p signal either Idc or Vdc, Universal AC/DC aux With LED Display.